This function resets the system to the zero position. A reset may be required in the following cases:
- One of the components is removed
- The bases don't work synchronously in tandem operation
- After a power outage (only for tandem operation)
- System error
Reset Procedure
Press and hold the LEARN button on either the Power Supply or the Control Box for 3 seconds until the LED blinks. The LED will blink three (3) times. Then press the LEARN button five (5) times. The LED will blink quickly, then remain on. The process is complete.
23
-21
Was this article helpful?
1 out of 23 found this helpful