Note: The following instructions are for single bases or two bases operating independently. Some instructions are time-sensitive, please read the following instructions before attempting to pair.
Step 1: Ensure the base is disconnected from the power source. Please ensure your remote has fresh batteries.
Step 2: Press and hold the FLAT and STOP buttons simultaneously for at least 10-15 seconds.
Step 3: The current RF channel number will be shown on the screen at the top of the remote. The RF channel is the 3-4 digit number that populates in the screen. When the RF channel number begins flashing release the FLAT and STOP buttons.
Step 4: Press the FLAT button to confirm the RF channel. The RF channel number will flash for 30 seconds.
Step 4: Within 30 seconds, reconnect the base power supply to a working outlet. You will hear two "double-clicks" when the set-up is successfully completed. You may use the remote when the RF channel stops flashing. Alternatively, you can press the STOP button to stop the RF channel from flashing.
You can find more information on pairing your Ergo Premier Base here.