The original remote that comes in the box is already paired to the adjustable base. No further action is needed. In the event that the remote is not paired with the base, follow the steps below.
Step 1
Remove the rear cover of the remote control by sliding it down to expose the PAIR button. Unplug the Power Cord from your power outlet. Wait 1 minute, then plug it back into your power outlet. Perform Step 2 within 10 seconds, while the control box light is flashing.
Step 2
Press and hold the PAIR button on the back of the remote. The PAIR button will illuminate and start to flash. When the PAIR button stops flashing, the LED light on the control box will stop flashing. Release the PAIR button.
Step 3
Test all remote functions. If the remote buttons do not impact the adjustable base movements, please repeat the process or call customer service: U.S. at 1-800-499-1965 or Canada at 1-800-268-4414.