Compatible Tempur-Pedic® Power Bases support silent alarms using the vibration motors in the bed to wake you up. To enable, select Menu>Sleep Cycle Alarm and scroll down to select Alarm Type: Vibrate Power Base. When turning on Vibrate Power Base, the audible alarm will be disabled. One must choose either Music/Sounds from the mobile device or vibrate power base. When the Vibrate Power Base alarm goes off, it will start with very subtle, short vibrations and ramp up to 3-second-long vibrations.
If at any time during the vibration alarm you wake and wish to turn it off, use the flat button on your in-app remote to turn the vibration alarm off. If you don’t stop the alarm, it will run once, wait 5 minutes, then run a second time. At that point, the vibration alarm will stop until the alarm is triggered the next day.
Note: For queen, full, and synchronized split king beds, vibration motors for both sides (both sleepers) will go off when the vibration alarm is used. For split king beds, which are configured to move independently, only the side of the split king bed configured for the alarm to go off will vibrate unless both sleepers have their vibration alarms enabled.